Engineered Golf

Should I consider a putter fitting? Is it worth it?

Golfers use the putter more than any other club in the bag, yet putter fitting doesn’t get the attention it deserves.  It’s not as glamorous as a driver fitting.  But here’s some food for thought.  Most golfers use their driver about 12 - 14 times a round.  That’s roughly 15% of the strokes per game by the average golfer.  Yet 43% of the average golfer’s shots are struck with the putter.  We use the putter 2.5 times more than any other club in the bag.  Pretty convincing that we need to consider fitting our putter when we use it so often.

 

Why get fit when buying a new putter?

putter fittingLet’s answer this with a rhetorical question.  How do most golfers buy a putter?  By trial and error, with the emphasis put almost entirely on the “look” or the design features of the putter head.  Instead, you need to consider the 5 critical putter fitting elements which, if properly fit, could strip strokes off your score.

 

Granted, it’s a fact – if the golfer isn’t confident with the look of the putter behind the ball, they won’t have the confidence or the ability to accurately line up the putt.  On the other hand, if the putter’s length, loft, lie, aim and overall weight balance are not matched to each golfer’s style of putting, there is little chance the putter will lower your score. 

 

What’s so important about putter length?

When you think that golfers are so different in their height, arm length and putting posture, it’s logical to think that the length of the putter must be custom fit to ensure a smooth putting stroke.  Arms scrunched up into the body, or stretched out to the point of tension while stroking the putt, doesn't help you with putting consistency.  The proper length putter assists with good posture; it also helps get your eyes directly over, or just slightly inside the ball.

 

Putter loft is not that important, is it?

Putter loft is needed to get the ball out of the small depression that occurs when the ball comes to rest on the green.  When the blades of grass are longer, (on slower greens), a deeper cupping action is created as they are pressed down by the weight of the golf ball. Slower greens need more putter loft than faster greens to get the ball out of the deeper depression and rolling smoothly thereafter.  So the initial starting point for putter loft should be based on the greens that you play most often.

 

putter fittingThe loft of the putter must also be matched to your hand position at impact to ensure the ball rolls smoothly.  Putts that initially bounce, lose too much energy and often deflect off the target line.  Do you apply a forward press to start your stroke or position the ball back of center in your stance?  If so, you need more loft.  Are you a wristy putter or do you position the ball ahead of the center to front portion of your stance?  If so, you may need less loft. 

 

Okay, we’ve covered putter loft, so what’s up with putter lie angle?

Since putters do have loft, that means if the toe or the heel of the putter is off the ground at impact, the face is pointing somewhere other than the intended target line.  For consistent accuracy, the putter’s lie angle must be adjusted for each golfer so the putter sits perfectly in the center of the sole from heel to toe.

 

If a putter with 4 degrees of loft has an incorrect lie angle of 4 degrees it will start the ball off-line even with a square face angle.  You will lose a fraction of the hole because of the misalignment.  For a 33 foot putt, 41% of the hole is out of play, a 22 foot putt eliminates 27% of the hole, and an 11 foot putt obscures 14% of the hole.  So an incorrect lie angle compounds an aiming problem.

 

Putter Aim

Okay, the proper length and lie angle have been established.  But if the putter cannot be aimed properly, there is very little chance of sinking putts beyond 3 feet in length.  Here are a few numbers to let you know how important and sensitive aim is. At 5 feet distance, anything greater than 2 degrees off line will not go in the hole on a straight putt!putter fitting

Just about all elements of putter design – different head and sole shapes, hosels, aim lines, shaft lengths, and other design variables – can promote different patterns of aim and keep you from being able to aim a putter at a target.  We laser test your aim with different head shapes, the presence or non-presence of alignment lines, and differing offset, length, lie and other variables.

 

What are the benefits of putter weight balance?

There is a weight balance for putters that will allow every golfer to be more consistent.  One of the most interesting developments in modern putter fitting is to add weight in the grip end of the putter.  Counter-weighting, as it is called, with a 60 to 100 gram weight installed in the grip end of the shaft, is proving to allow many golfers to develop a smoother stroke.  That results in more on-center hits with the putter and better distance control.  Remember about the 2 degrees mis-alignment at 5 feet?  Counter-balancing can also assist you with better face angle control by "quieting" your hands.

 

Testing Equipment

 

Our experience and eyes give us a tremendous amount of feedback when we watch you initially hit putts.   Low tech devices such as string lines and mirrors assist you to feel proper posture  We have high tech gadgets too:  high speed video, Zenio Putter Analysis monitor, specialized putting fitting tools, laser alignments, dew boards and more.  We can combine all of these tools to produce the ultimate putter fitting.  You have the opportunity to get the largest improvement in scoring with a complete putter fitting.  CALL US!

Laser Optic Face Angle Alignment & Aim

putter fitting

Tool Used For Dynamic Putter Fitting

Zenio Putter Stroke Analysis

putter fitting

To explore further, you can view/complete our Putter Fitting Questionnaire.  Click Here.

Engineered Golf